How to use the PS4 controller on PC guide: Bluetooth and wired | PC Gamer

A step-by-step guide to connecting the DualShock 4 to your PC.

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.

The PS4 controller isn't the hottest gamepad around anymore, but you know what, it's still a great PC controller. When the PlayStation 4 came out, its redesigned DualShock 4 was a big deal. It had a touchpad, new analog sticks for the first time since the PlayStation 1, and most importantly for us, it could connect to a PC with a USB cable or Bluetooth, no special adapter required.

The DualShock 4 is easy to use on PC, still feels great in the hand, and is lighter and smaller than the PS5 controller. For those reasons it may be the right PC pad for you, even years into the PS5's life. Sure, it's not quite as exciting as the PS5's DualSense controller with its adaptive triggers and advanced haptics. But sometimes the best controller is the one you have sitting around.

Connecting the DualShock 4 to PC via Bluetooth is quick and easy with no special hardware required. If Steam is where you play all of your games, good news: Steam Input's native support for the DualShock 4 makes it just as plug-and-play as an Xbox gamepad. Lots of games also recognize the PlayStation controller and will show you the correct button icons, or offer the option to manually toggle them in the in-game controller settings. Down with ABXY tyranny!

To get you started using your PS4 controller on PC I'll guide you through the Steam controller setup process, which will only take you one or two minutes.

If you want to play games that aren't on Steam with your DualShock 4, I'll tell you how to set up DS4Windows, a handy tool to cover every other game you might jump into.

Follow these steps to not just use your DualShock 4 with Steam, but to customize it to your liking:

Thanks to official Steam support, there's almost no setup involved in getting your PS4 controller working in Steam. Just be sure to pair or plug in your controller before opening Steam or any Steam games, or else your controller may not be recognized (click the 'pair' link to jump down to the Bluetooth section of this guide).

Keep up to date with the most important stories and the best deals, as picked by the PC Gamer team.

If you run into any connection issues, closing and reopening Steam should do the trick. Otherwise, try using a USB 2.0 port instead of a USB 3.0 port. DualShock 4s are weird like that.

Once connected, navigate to Steam's settings menu—under the top left dropdown—to get everything dialed in. Under the Controller tab, you should see your controller listed and can customize its name if you want to.

Click Calibration & Advanced Settings to fine-tune the joysticks, gyro, and disable/enable rumble. You can also click LED settings to change the color of the lighting. One important tip: Make sure you have PlayStation Controller Support set to "Enabled in Games w/o Support" to ensure the controller works in any Steam game.

While in-game, you should be able to press the controller's Guide button to open up the customization menu and change your button configuration as desired for that individual game. Most games also have community-submitted controller configurations to choose from.

If there's a game you want to play with a DualShock 4 that isn't on Steam, you can open the Steam Games menu and click "Add a non-Steam game to my library." Find your game from the selection and click the check box next to it. Launch it via Steam and it should work just fine with Steam Input. But if this for some reason doesn't work with your chosen game, it's time for DS4Windows.

If you're just playing Steam games, you don't need to install anything else! But to use DS4Windows for non-Steam games, you'll need to disable that Steam PlayStation Controller Support by setting it to "Not Enabled."

First, download the newest Microsoft .NET Framework. If you're still running Windows 7, install the Xbox 360 controller driver next. This driver is included with Windows 8, 10 and 11.

Before you do anything else, plug in your PS4 controller with a micro-USB directly to your PC, or pair it through the Bluetooth menu, or with a USB wireless adapter.

Download and extract newest DS4Windows .zip file next, and open it up. You can ignore the DS4Updater if you already have the newest version.

Any controllers you've connected will be displayed under the Controllers tab. If not, close DS4Windows, reconnect your controller, then re-open the software. Don't worry about your controller's ID number, we won't be needing it.

Next, open the Settings tab in DS4Windows to configure a few things. Make sure the Hide DS4 Controller box is checked. This will prevent DS4Windows from conflicting with any game's default controller settings. For the same reason, make sure Use Xinput Ports is set to one.

From the Settings tab, you can also set DS4Windows to run at startup, or remain active in the background. You can also update DS4Windows directly from this tab by clicking Check for Update Now at the bottom left. Above that, you'll see Controller/Driver Setup. If you run into any issues, open this setup and follow the prompts to install any missing drivers.

DS4Windows works by reading your DualShock 4 as though it were an Xbox 360 controller. That means you won't get the correct Square/X/Triangle/Circle button icons by default in most games. Some games will give you the option to change, but either way, it'll now work with any game that has Xinput support—i.e. most every modern PC game that supports gamepads.

You don't have to remap anything, but if you want to change some buttons or adjust sensitivity outside of in-game menus, just open the Profiles tab in DS4Windows. If you're feeling confident, click New to start a new profile, though this is easier said than done. Otherwise, select the DualShock 4 profile and click Edit.

Let's say you want to swap your bumpers and triggers. First, find L1/R1 and L2/R2 in the scroll wheel in the Controls section, or just click them on the virtual controller. You want to swap L1 with L2 and R1 with R2, so start by clicking L2.

Then, just click the button you want L2 to act as—in this case, L1. Voila, your left trigger will now act as your left bumper. Repeat this process with the other triggers and bumpers to complete the change and prevent redundancy. You can save this button setup as a separate profile and swap between profiles in the Controllers tab.

How to use a:PS3 controller on PCNintendo Switch Pro controller on PCXbox One controller on PCPS5 DualSense controller on PC

To connect your PS4 controller via Bluetooth, simply hold the small Share button and the central circular button simultaneously until the controller's backlight starts flashing. If you own the now-discontinued official PlayStation adapter, press the button on it until it starts flashing. Once both are flashing, they will automatically pair after a few seconds.

Don't have the official Sony adapter? That's okay—another Bluetooth adapter should work, too. For a PC with Bluetooth built-in (or if you have a generic USB dongle), just press the Windows key and type "Bluetooth" to open the Bluetooth & devices settings menu. Click "Add device" and look for the controller. Once it's flashing, you should see it listed here.

Luckily, you don't have to pair your controller every time you want to use it with the official adapter. As long as you don't unplug the adapter, it will save its last connection, so you can just tap your controller's central PlayStation button to reconnect it. Windows should also remember the controller, so if yo don't use it on a console in the interim, it should be quick to re-pair with your PC.

The official Sony DualShock 4 USB wireless adapter is the simplest Bluetooth option. You may have to hunt for it or spend a little more than you would on a standard Bluetooth dongle, but it's worth it for its out-of-the-box functionality if you find one on the cheap. Otherwise, roll with regular Bluetooth or pick the simplest route: a cable.

Wes has been covering games and hardware for more than 10 years, first at tech sites like The Wirecutter and Tested before joining the PC Gamer team in 2014. Wes plays a little bit of everything, but he'll always jump at the chance to cover emulation and Japanese games.

When he's not obsessively optimizing and re-optimizing a tangle of conveyor belts in Satisfactory (it's really becoming a problem), he's probably playing a 20-year-old Final Fantasy or some opaque ASCII roguelike. With a focus on writing and editing features, he seeks out personal stories and in-depth histories from the corners of PC gaming and its niche communities. 50% pizza by volume (deep dish, to be specific).

Electronic Arts chief says Dragon Age: The Veilguard is a 'return to what made BioWare great'

Monster Hunter Wilds almost ruined Palicoes by letting them speak English, but thankfully you can revert them to meows

I set $5 as an arbitrary maximum price while browsing GOG's Halloween Sale, and the number of good games I got genuinely surprised me