The 3 Best Wireless HDMI Video Transmitters of 2023

Sometimes it's not convenient, or even feasible, to run an HDMI video cable between your video player and your TV or projector. A wireless HDMI video transmitter solves that problem, allowing you to send an AV signal wirelessly across the room or through walls to another location.

A good wired setup will always be more reliable, but if you need wireless transmission, we recommend the Nyrius Aries Home+ because it performs well and has more features than the competition.

A wireless HDMI system consists of a transmitter connected to your video player and a receiver connected to your TV or projector.

A good HDMI cable will perform more reliably than a wireless HDMI system. A wireless signal is always susceptible to interference.

There are two main wireless HDMI protocols: One is designed to send signals around the home, while the other is meant for single-room use.

If your video player uses a standard infrared remote, look for a system with IR pass-through so you can control the player from another room.

This system reliably sends 1080p HDMI video and 7.1-channel audio wirelessly, through walls, up to 100 feet away, and is loaded with helpful features. But it costs a bit more.

There's nothing worse than sitting down to watch TV and having the video signal freeze, flash on and off, or disappear entirely. Unfortunately, that's what you get from many wireless HDMI video transmitters, especially if you’re trying to send the AV signal wirelessly over a long distance, through multiple walls. In our tests, the Nyrius Aries Home+ consistently delivered the most stable, reliable wireless signal and offered great picture quality overall.

Plus, this system boasts the widest array of features, including support for 7.1-channel surround sound (most of these systems support only stereo audio) and the ability to power the receiver unit through your TV's USB port so you don't have to plug it into a power outlet. The Aries Home+ also supports infrared pass-through, so you can control your source device when it's located in another room. The transmitter has two HDMI inputs to connect multiple sources at once, as well as an HDMI output to pass those signals through to a nearby TV.

Because the Aries Home+ is so full featured, it costs a bit more than most competitors. If you don't need the HDMI output and the second HDMI input, you can save $50 and get the Nyrius Aries Home instead.

Advertisement

The WEX200V3 is a reliable performer, and you can change the wireless channel as necessary to improve performance. But it passes only stereo audio and isn't as user-friendly.

*At the time of publishing, the price was $199.

If the Nyrius Aries Home+ isn't available and you need to pass only stereo audio (as opposed to surround sound), the J-Tech WEX200V3 is a great alternative. This wireless HDMI system performed almost as reliably as our top pick in our tests, and we didn't see a lot of signal freezes or dropouts. At times we could see a bit of signal degradation in higher-quality Blu-ray video, which is a common problem with many multiroom wireless HDMI systems.

J-Tech devices are aimed at the professional and custom-installation markets, and the WEX200V3 definitely has a "pro" look, with metal boxes, big antennas, and proprietary, lockable power cables. That last one means you can't power the receiver via USB, as you can with our top pick.

But the WEX200V3 is the only system we tested that lets you easily change the wireless channel (the frequency it's using to transmit the signal) with the press of a button, so it's good for use in areas with a lot of potential interference.

The Blackbird Pro offers an affordable way to wirelessly transmit a clean 4K signal across a room, but the technology doesn't work through walls or other obstructions.

*At the time of publishing, the price was $149.

If you’re looking for an easy, affordable way to wirelessly transmit an AV signal across a room—perhaps from a Blu-ray player to a front projector that's mounted on the back wall or the ceiling—we recommend the Monoprice Blackbird Pro 16049.

This system has been our budget pick for years, and a recent upgrade has made it even better: It now supports video signals with a resolution up to 4K/30 Hz. (Monoprice hasn't been clear about this update, so much of the online documentation still says the maximum resolution is 1080p/60, but our tests confirmed that it works with 4K.)

The Blackbird Pro's wireless technology differs from that of our other picks and requires line-of-sight between the transmitter and receiver, so this system works only as an in-room option, and you will experience stability issues if obstructions sit between the two boxes. But when it has a clear path, the Blackbird Pro system delivers a great-looking picture and supports 7.1-channel audio. And you can power both the transmitter and receiver through USB, so you don't need to position them near power outlets.

This system reliably sends 1080p HDMI video and 7.1-channel audio wirelessly, through walls, up to 100 feet away, and is loaded with helpful features. But it costs a bit more.

The WEX200V3 is a reliable performer, and you can change the wireless channel as necessary to improve performance. But it passes only stereo audio and isn't as user-friendly.

*At the time of publishing, the price was $199.

The Blackbird Pro offers an affordable way to wirelessly transmit a clean 4K signal across a room, but the technology doesn't work through walls or other obstructions.

*At the time of publishing, the price was $149.

I have more than a decade of experience reviewing TVs, projectors, and other video devices. I was formerly the video editor and primary TV and projector tester for HomeTheaterReview, and I previously contributed display coverage to Home Theater Magazine, Electronic House, and other publications. I am an Imaging Science Foundation Level II certified video calibrator, and I have the full complement of objective-testing gear to measure and evaluate the performance of these systems.

A good HDMI cable will always do more—and do it more reliably—than a wireless HDMI system. If it's at all feasible for you to go the wired route, do so.

A wireless HDMI video transmission system consists of a transmitter unit that connects to your HDMI source(s) and sends the signal wirelessly to a receiver unit connected to your display. This type of system has three main uses:

A wireless HDMI video system is meant for use with sources that have HDMI outputs, such as media streaming devices, cable or satellite boxes, gaming consoles, and Blu-ray or DVD players. If you’re looking to send an AV signal from a non-HDMI source such as a phone, tablet, or computer, you can find other, often lower-priced options that let you attach a plug-in dongle to the mobile device and transmit wirelessly to a TV. But most newer mobile devices already have built-in tech that allows them to mirror their content or stream video wirelessly, such as AirPlay, Miracast, or Chromecast.

In a perfect world, a wireless HDMI video transmitter would do everything an HDMI cable does, just wirelessly. In reality, unfortunately, that isn't the case. Wireless HDMI systems can't transmit high dynamic range video or high-frame-rate 4K video games. Many of them can't even transmit multichannel audio. A good high-speed HDMI cable will always do more—and do it more reliably—than a wireless HDMI system. If it is at all feasible for you to go the wired route, do so. But if not, here are the things to think about when you’re shopping for a wireless system.

Multiroom or in-room: Most of today's wireless HDMI systems use one of two wireless protocols. Many of them are Wi-Fi–based systems that transmit on the 5 GHz band, so they can send the signal wirelessly through walls and around the house but with some compression that may hinder the picture quality. Some Wi-Fi–based systems let you add more than one receiver unit, so you can send the signal from one source to multiple locations. The second protocol, called WirelessHD, transmits over the 60 GHz band without the compression you get from Wi-Fi systems, so it delivers a better-looking picture. But you need line-of-sight between the transmitter and receiver, so it's a single-room-only option. It's an especially good choice for use with front-projection systems.

Resolution: Pretty much every wireless HDTV system available now can transmit up to 1080p/60 video (1080p resolution at 60 frames per second) from whatever HDMI source you send to it, including HD media streaming devices, Blu-ray players (2D and 3D), cable or satellite boxes, and gaming consoles. Some newer wireless HDMI systems support a 4K resolution but only up to 30 frames per second (we talk about how this might affect performance with our budget pick). In most cases, we don't think the step up to 4K is necessary when you’re sending video to a secondary TV, but it may be helpful when you’re sending video to a projector, since projectors deliver a much larger image, where the improved resolution might be noticeable. As we said above, no wireless HDMI system supports high dynamic range video, so you cannot get the full Ultra HD experience, via streaming or Ultra HD Blu-ray disc, if you go the wireless route. If you want that support, look for a long active HDMI cable, an HDMI-over-Ethernet extender, or another wired HDMI option.

Stereo or multichannel audio: The majority of wireless HDMI systems available today support only stereo audio pass-through, which is fine if you’re connecting the receiver unit directly to a TV in another room. But if you want to send a surround-sound signal from a source to an AV receiver or soundbar, look for a system that supports multichannel audio.

USB power: If the transmitter and/or the receiver can draw power via USB, you can connect the box directly to a source's or TV's powered USB port (if it has one; most TVs do). The benefits: You don't have to place the boxes near power outlets, and they will turn on and off with the connected devices. It's more common for the receiver unit to support USB power than for the transmitter unit to do so.

Infrared pass-through: Some wireless HDMI systems can transmit IR signals, which allows you to control the video source that's attached to the transmitter (such as your Blu-ray player or cable box) from the secondary location, using the source's own IR remote control. If your source has a Bluetooth- or RF-based remote that works through walls (like the remotes that come with Chromecast and Apple TV media streamers), you don't need IR pass-through.

Number of HDMI inputs: Do you want to connect two sources to the transmitter at the same time? If so, look for a system with two HDMI inputs. There aren't many. (Our top pick is one.)

HDMI output: If the transmitter unit has an HDMI output, you can feed your source into the transmitter, send the signal wirelessly to a distant display, and connect a nearby display to the transmitter at the same time.

You may not need all of the features described above. Think about how you plan to use the transmitter and the AV systems you’re connecting it to. Which features are essential to that purpose?

In deciding which wireless HDMI systems to test, we looked at both multiroom and in-room options from brands we know, including DVDO, Iogear, J-Tech, Monoprice, and Nyrius. In recent years, we’ve seen a surge of wireless HDMI systems offered on Amazon, all of which look pretty similar and come from brands that we’ve never heard of (and that don't have substantial company websites). From that group, we purchased one of the Amazon top sellers (the BovBox) to see how it would fare against the brand-name competitors.

We dismissed systems that cost significantly more but offered the same basic features, and we chose newer models over older ones to ensure that the systems in our test group would be compliant with more recent HDMI specifications. We did not consider a 4K resolution to be essential because in most situations—and due to technology limitations—you’re usually better off sending 1080p.

All wireless HDMI systems have signal interruptions from time to time. The better ones keep those interruptions to a minimum.

For our latest round of tests, we pitted two previous picks—the Nyrius Aries Home+ and the Monoprice Blackbird Pro—against three new systems. I tested each system using a combination of three sources (an Apple TV 4K media streamer, a Google Chromecast media streamer, and an Oppo UDP-203 Ultra HD Blu-ray player) with three TVs (a 4K LG OLED, a 4K Samsung LCD, and a 1080p TCL LCD). The TVs were in fixed locations, and I experimented with moving the sources to different parts of my tri-level, 1,950-square-foot home. My torture test sent the signal from the far corner of the family room (first floor) across the house to the opposite-corner bedroom (third floor). In between those corners are various walls, stairs, doors, Wi-Fi routers, and smart speakers, all of which had the potential to generate interference.

I evaluated the following attributes of each system:

This system reliably sends 1080p HDMI video and 7.1-channel audio wirelessly, through walls, up to 100 feet away, and is loaded with helpful features. But it costs a bit more.

If you want to send an HDMI signal wirelessly to a secondary location in your home, the Nyrius Aries Home+ is the best wireless HDMI video transmitter for the job. It delivers a clean, reliable 1080p signal through walls and other obstructions, and it has the best assortment of useful features to integrate into any type of AV setup. Whereas many other wireless HDMI systems support only stereo audio, this one can pass up to 7.1-channel audio, so you have more flexibility to incorporate a soundbar or a surround-sound system. The Aries Home+ is easy to set up, and it's the only system we tested that has two HDMI inputs, so you can wirelessly stream two sources without having to swap cables (the included remote lets you switch between the sources). This system is a bit more expensive than the competition, but it has the flexibility to change with your AV gear in ways that the other models don't.

The Aries Home+ is a Wi-Fi–based system that transmits over seven channels (or frequencies) between 4.9 GHz and 5.9 GHz, using dynamic frequency selection (DFS) to automatically switch to a different channel to stabilize the signal when necessary. In our tests, the resulting signal was the most reliable. Even in my long-range torture test across the house, I didn't see a lot of signal freezes or dropouts. The experience was stable enough that I often forgot I was using a wireless system, which was never the case with some of the other models we tested.

Equally important is that the Aries Home+ delivered a particularly clean video signal, producing far fewer compression artifacts than we saw with any of the other Wi-Fi–based systems we tested. In our picture-quality test scene (chapter 2 from the Mission: Impossible – Rogue Nation Blu-ray disc, where Ethan Hunt is chained up in a dark basement), we saw a tad more noise in the dark backgrounds through the Aries Home+ than we did with a direct HDMI connection, but the effect was minor enough that you may not notice such things. Only the Monoprice Blackbird Pro delivered better picture quality, and that's an in-room system.

In our tests, the Aries Home+ passed a variety of multichannel soundtracks: Dolby Digital 5.1, DTS 5.1, Dolby Digital EX, and 7.1 PCM (but not the highest-quality, uncompressed Dolby TrueHD and DTS-HD Master Audio formats). In addition to having two HDMI inputs, the transmitter unit has an HDMI output to connect a TV directly to it. When we used the HDMI output to feed a wired HDMI signal to a nearby TV, we detected minimal lag between the direct HDMI connection and the wireless connection in the next room.

The receiver unit can draw power from a USB port on your TV or projector (if your device has a powered port), which brings several benefits. You don't have to position the receiver close to a power outlet, you get a cleaner look with a wall-mounted TV, and the receiver automatically turns on and off with the TV—so you don't have to worry about its power and connection lights distracting you when the TV is off. The receiver unit is small enough to tuck behind many wall-mounted TVs or to sit atop a projector, and a keyhole insert on the backside allows you to wall-mount it (the hardware to do so is included).

The transmitter unit is more than twice as large as the receiver and sits vertically in its stand, but you could lay it on its side if you prefer, and it too has a keyhole insert for wall-mounting. Unlike the other multiroom systems we tested, the Aries Home+ does not come with optional screw-in antennas, but in our tests it certainly did not need them to improve signal performance, and the absence of antennas makes for a nicer, more discreet look.

The IR pass-through function worked fine with my Oppo UHD Blu-ray player and its IR remote; the Nyrius package includes an IR cable that plugs into the transmitter unit and connects via a sticky pad to your source's IR window. For many of my tests, I used the Google Chromecast and Apple TV 4K media streamers with Bluetooth/RF remotes that work through walls, so I didn't need the IR pass-through.

Overall, the Aries Home+ distinguished itself from the pack with its consistent performance and its full list of features, all of which worked as advertised. If you’re certain you won't need the transmitter's HDMI output and second HDMI input, you can save a little money by getting the Nyrius Aries Home instead.

Like all wireless HDTV systems, the Nyrius Aries Home+ isn't perfect in its signal reliability. Inevitably you will encounter instability issues such as the picture freezing, disappearing, or breaking up for a moment. This system usually corrects itself pretty quickly, but your results will vary depending on the size and construction of your house, the sources of wireless interference, and the distance between the transmitter and receiver units.

Also, the Aries Home+ can be a little slow to lock on to the signal when you first power it up, if it detects interference. During most of our testing period, the system started up quickly, but on occasion it had to search for the most stable channel (frequency) to use. When the system is doing this, you can see the channel selection flashing on and off the screen. In our tests, though, once it found the most stable signal, everything was fine.

The package includes power cables for both the transmitter and the receiver, but it does not include the Mini-USB–to–Type-A USB cable you need to power the receiver unit off a TV or projector. Also, there's no IR port or cable for the receiver unit, so you need to point the source remote directly at the receiver for it to work; that means you can't hide the receiver behind a TV if you’re relying on IR pass-through to control the source.

The WEX200V3 is a reliable performer, and you can change the wireless channel as necessary to improve performance. But it passes only stereo audio and isn't as user-friendly.

*At the time of publishing, the price was $199.

If the Nyrius Aries Home+ is unavailable or you’re willing to sacrifice some features to spend less, the J-Tech WEX200V3 is a good alternative. In our tests, it performed almost as reliably as the Aries Home+ did, and it gives you the option to add more receiver units (sold separately) to send the signal to multiple rooms. But the picture quality isn't quite as clean, this system supports only stereo audio (not surround sound), and the receiver unit can't draw power from your TV's USB port. The J-Tech stuff also looks quite industrial, with metal boxes and big antennas.

The WEX200V3 is a Wi-Fi–based system that operates in the band from 5.18 GHz to 5.825 GHz, allowing you to transmit up to 1080p/60 video through walls. Like the Aries Home+, it delivered a mostly reliable signal in our tests; I saw the occasional stutter in my longest-range test, but from most locations in my home, the picture was generally free of stutters, freezes, and dropouts.

When you do encounter interference, this is the only system we tested that lets you easily change the wireless channel (that is, the frequency it's using to transmit the signal) from a list of seven options. You can do this by pressing a button on the transmitter unit or by using an online portal. The ability to manually change channels gives you a level of instant control that some people may really like. Then again, others may prefer the automatic channel switching of the Aries Home+, which eliminates the need to deal with interference issues themselves.

From a picture-quality standpoint, the WEX200V3 represented a small step down from the Aries Home+ in our tests. Although the J-Tech system's picture looked better than what we saw from the Iogear and BovBox multiroom systems, compression artifacts appeared in our Blu-ray demo scene from Mission: Impossible – Rogue Nation. The black backgrounds in chapter 2 had some macroblocking (which looks like lots of little, shimmering squares instead of a smooth, clean background), and that effect obscured fine details. Compression artifacts already exist in lower-quality streaming and cable or satellite signals, so if one of those is your source, you may not see any further degradation with the J-Tech system. But with a high-quality Blu-ray signal, you’d probably notice it.

Additionally, when we fed the J-Tech system a native 1080p/24 Blu-ray signal, it sent the signal to the TV as 1080p/60, and in doing so it created choppy motion that was unwatchable. You can easily get around this problem by setting your player to output 1080p/60 instead, but the Aries Home+ does not have this issue.

The WEX200V3 supports only stereo audio, which is all you need if you’re connecting the receiver unit directly to a TV or a two-channel soundbar—but it's not ideal if you want surround sound. The transmitter unit has one HDMI input, as well an HDMI output to pass the signal through to a nearby TV, but it lacks the second HDMI input you get on the Aries Home+.

Because J-Tech systems are aimed at the professional and custom-installation markets, the boxes look quite utilitarian, sporting black, metal cases with hard edges. The system also encompasses a pair of optional (and large) screw-on antennas for both the transmitter and receiver units, as well as proprietary, locking power cables—which means you can't power the receiver box from your TV's USB port. This limitation is an inconvenience, especially when you add in the fact that the receiver has bright blue lights that don't turn off. Since the receiver unit has no setting to turn itself off along with your TV via USB, you have to unplug it to turn off the lights (though you could also cover the lights with electrical tape).

On the plus side, the WEX200V3 has IR pass-through and comes with IR extender cables for both the transmitter and receiver, so you can easily tuck away the boxes out of sight and still control your IR-based sources with their respective remotes.

Even though the WEX200V3 system is less home-friendly than our top pick, it delivers the essential functions that most people need—for a lower price. If your home or apartment is prone to interference and you want manual control of your wireless HDMI system, this one is for you.

The Blackbird Pro offers an affordable way to wirelessly transmit a clean 4K signal across a room, but the technology doesn't work through walls or other obstructions.

*At the time of publishing, the price was $149.

If you need to send the AV signal only across a single room, instead of through walls to other rooms, we recommend the Monoprice Blackbird Pro 16049. This system uses a different wireless technology than our other picks, one that requires line-of-sight between the transmitter and receiver, so it doesn't work for multiroom purposes. The Blackbird Pro has been our budget pick for years, and a recent upgrade increased the maximum resolution from 1080p/60 to 4K/30 (that means a 3840×2160 resolution at 30 frames per second). That upgrade makes the Blackbird Pro an amazing value now, since other 4K systems that use the same in-room technology cost significantly more. The Blackbird Pro is an especially good choice if you have a projector-based home theater system and want to wirelessly send the AV signal from your gear rack to a ceiling-mounted projector.

The Blackbird Pro uses WirelessHD 60 GHz technology, which allows for uncompressed video. In our picture-quality test using the Mission: Impossible – Rogue Nation Blu-ray disc, we saw no added compression artifacts and no clear difference, in terms of detail, between the Blackbird Pro's performance and that of a direct HDMI cable.

As we mentioned, this system works only as an in-room option—and you will encounter stability issues if obstructions sit between the transmitter and receiver boxes. I transmitted the signal across two different rooms (at a distance of 20 feet in one room), and for the most part, the signal was stable. At times I’d see a little stutter when I walked between the transmitter and receiver, and if I stood right between them for a while, the picture would eventually disappear. So you should position the boxes in a way that there won't be a lot of foot traffic causing interference, and obviously you can't tuck them away in a gear cabinet or behind a TV.

Even though the Blackbird Pro system supports a 4K resolution, it does not support 4K at 60 Hz or 120 Hz, nor does it support HDR playback. Since HDR-capable projectors aren't bright enough to do HDR properly anyhow, this isn't as much of a loss for projector owners as it is for TV owners. (If you want HDR with your projector, you’ll have to run wires.) Most 4K sources can output at 4K/30 or 4K/24 instead of 4K/60, but with content that displays at 60 Hz (such as HDTV channels), the motion can look a bit choppy or unnatural when shown at 4K/30. With TV and sports shows, you might be better off transmitting at 1080p/60, but for Ultra HD and Blu-ray discs, you can set up your player to output films at 4K/24, and the motion will look just as it should.

The Blackbird Pro supports 7.1-channel soundtracks, including the uncompressed audio signals of the higher-quality Dolby TrueHD and DTS-HD Master Audio formats.

You can power both the transmitter and receiver units via USB; as a result, you don't need to position them near power outlets, and they turn on and off with their connected devices. The transmitter unit has one HDMI input. It lacks an HDMI output and IR pass-through, but since this Monoprice model is an in-room system, those features aren't necessary.

The transmitter and receiver boxes look identical. Both are notably petite and visually discreet, but they’re so small and light (even when attached to their tiny stands) that it's easy for heavy HDMI cables to pull them over. The boxes have no keyhole inserts, and the package includes no wall-mounting hardware—but really, the boxes are small enough that you could adhere them to the wall with a large sticky pad.

Monoprice hasn't clearly articulated the 4K upgrade to this system. Even on the company's own website, some of the text still says that the maximum resolution is 1080p/60—and a box on the page points you to a "newer" but actually discontinued 4K model. But don't be deterred: Our tests confirmed that this system supports 4K, as long as you make sure that your 4K source is set for 4K/30 output, not 4K/60.

We’ve tested a variety of wireless HDMI systems for this guide since we created it in 2014, but most of them have since been discontinued. Here are some systems we’ve considered or tested that are still available:

Blackweb Wireless HD Video Kit: In a previous round of tests, we tried two samples of this multiroom system that sells through Walmart, in both a house and an apartment environment. The Blackweb kit, which supports up to three HDMI sources, can work through walls, and it delivered a reliable signal across several rooms in the house. However, in the apartment, the signal was much less reliable—we saw video stuttering and blocking even when the transmitter and receiver were located in the same room. Also, both Blackweb samples crushed blacks, making the image too dark, so you’d have to readjust your TV's brightness control to compensate.

BovBox Wireless HDMI Extender Kit: This multiroom, Wi-Fi–based kit sells on Amazon and looks quite similar to many other Amazon offerings under different names. As with the J-Tech WEX200V3, you can add extra receiver units. BovBox claims that its system works at distances up to 656 feet—but in our tests, the 1080p/60 signal was unstable at much shorter distances. The picture flickered a lot in our long-range test across the house, and it wasn't even that stable with only one wall and about 5 feet between the transmitter and receiver boxes. Transmission is locked in at 5.8 GHz, as the system offers no ability to manually or automatically adjust channels to deal with interference. And in our Blu-ray test, we saw a lot of compression artifacts that really hindered the picture quality in dark scenes.

DVDO Air 4K and DVDO Air 2K: Like the Monoprice Blackbird Pro, these systems use 60 GHz technology to deliver 4K/30 or 1080p/60 (respectively) video and multichannel audio. They are designed for in-room transmission between source and display and are priced significantly higher than Monoprice's offering for the same basic features and functions, so we did not test them.

Iogear GWKIT4K: Our former top pick (the now-discontinued GW3DHDKIT) came from Iogear, so we had high hopes for the GWKIT4K. Unfortunately, our review sample did not work well. This is one of the few multiroom, Wi-Fi–based systems that claim to transmit at a 4K/30 resolution, but we were never able to transmit a resolution higher than 1080p/60, despite much back-and-forth with the Iogear team. Even at 1080p, the signal was not as stable as what we saw from our Nyrius and J-Tech picks, and compression artifacts appeared in our Blu-ray test. This is the only system we tested that also lets you screen-mirror content from mobile devices, but it supports only stereo audio, lacks IR pass-through, and doesn't have an HDMI output on the transmitter. So even if we were just dealing with a defective sample, the GWKIT4K is lacking in features compared with our picks.

Iogear GW4K30GH60: We did not test this 60 GHz, in-room system because it has technology and features (with only stereo audio) similar to those of our Monoprice budget pick but costs a lot more. The boxes do have an interesting triangular design, though, if you’d like to make a visual statement.

J-Tech W6: We chose not to test this 60 GHz, in-room system because it's similar to the Monoprice Blackbird Pro in the technology it uses but is far more expensive. The one perk it offers over the Monoprice model is that the transmitter unit has HDMI, dual USB-C, and dual USB-A inputs, so you can wirelessly transmit signals from HDMI sources, computers, and USB peripherals. If you need that extra functionality, this system is worth a look.

ScreenBeam MyWirelessTV2: Years ago, we tested the Actiontec MyWirelessTV Wi-Fi–based system and did not rank it as a pick. This is a slightly newer version that has the core features we want to see in a multiroom system, including 1080p/60 video, 5.1-channel audio, IR pass-through, and HDMI output on the transmitter. But it's still an older model lacking a USB-power option, so we elected not to test it.

This article was edited by Grant Clauser.

Adrienne Maxwell

Adrienne Maxwell is the supervising editor of Wirecutter's audio/video team, covering everything from headphones to TVs. She has been a writer, editor, and reviewer in the consumer electronics industry for 20 years, and previously served as the executive editor of Home Theater Magazine and the managing editor of HomeTheaterReview.com.

by Geoffrey Morrison

These inexpensive HDMI cables will work with all your current gear, even 4K HDR TVs and sources.

by Chris Heinonen

You have two options: pairing a Denon HEOS Receiver with wireless speakers or buying a soundbar bundled with a wireless subwoofer.

by Haley Perry

We've tested the best cables, hubs, and dongles to help you connect your all your peripherals to your new laptop, even if it has only USB-C ports.

by Adrienne Maxwell

We recommend the best displays, sources, and accessories for watching 4K HDR movies and TV shows at home.